Swagat Steel & Alloys

General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available.

Both shapes available ROUND / SQUARE

Temper T6 / T651

Diameter Available: 8 MM TO 100 MM AND ABOVE

Uses: Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts.

Additional Information:

• Packaging Details: READY STOCK

Additional Information:

• Packaging Details: READY STOCK

We are offering a wide range of Aluminum Alloy Rods.

Dimension Available :8 MM TO 100 MM AND ABOVE

Aluminum Alloy Rods Grades Details:

• Aluminum Alloy Rods Grades 6061 T6 .
• Aluminum Alloy Rods Grades 2024 T3 .
• Aluminum Alloy Rods Grades 7075 T6 .
• Aluminum Alloy Rods Grades 2011 T3 .
• Aluminum Alloy Rods Grades 5086 .
• Aluminum Alloy 
• Aluminum Alloy Rods Grades 2014 .
• Rods Grades 6082 .
• Aluminum Alloy Rods Grades 5251 .
• Aluminum Alloy Rods Grades 1050 .

Additional Information:

• Delivery Time: READY STOCK

• Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available.

• Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts.

• Sizes 3mm to 300mm .

Aluminium alloy 5251 contains nominally 2.0% magnesium & 0.30% manganese. It has good workability, medium static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in marine atmospheres. It also has the low density and excellent thermal conductivity common to all aluminium alloys. It is commonly used in sheet, plate and tube form.

Machinability5251 is readily machinable by conventional methods. It should be machined at high speed with copious lubrication to avoid thermal distortion of the workpiece. Sharp tools are essential. High speed steel or tungsten carbide may be used. Cuts should be deep and continuous, with high cutting speeds. Woodworking machinery may be suitable for short runs.
Welding5251 is readily weldable by standard techniques. It is frequently welded with GTAW (TIG) or GMAW (MIG). Aluminium must be very dry & clean to avoid contamination & porosity of the weld. Filler metals 1100, 4043 or 4047 are used. 4043 is the most crack tolerant. Shielding gas must be dry & free of hydrogen.

Heat TreatmentAluminium 5251 is annealed at 345°C, time at temperature and cooling rate are unimportant. Stress relief is rarely required, but can be carried out at about 220°C. If loss of strength is of concern, stress relief tests should be conducted.

Additional Information:

• Packaging Details: READY STOCK

Machinability5251 is readily machinable by conventional methods. It should be machined at high speed with copious lubrication to avoid thermal distortion of the workpiece. Sharp tools are essential. High speed steel or tungsten carbide may be used. Cuts should be deep and continuous, with high cutting speeds. Woodworking machinery may be suitable for short runs.
Welding5251 is readily weldable by standard techniques. It is frequently welded with GTAW (TIG) or GMAW (MIG). Aluminium must be very dry & clean to avoid contamination & porosity of the weld. Filler metals 1100, 4043 or 4047 are used. 4043 is the most crack tolerant. Shielding gas must be dry & free of hydrogen.

Heat Treatment Aluminium 5251 is annealed at 345°C, time at temperature and cooling rate are unimportant. Stress relief is rarely required, but can be carried out at about 220°C. If loss of strength is of concern, stress relief tests should be conducted.

Additional Information:

• Packaging Details: READY STOCK

Additional Information:

• Delivery Time: READY STOCK

Additional Information:

• Delivery Time: READY STOCK

Aluminum Alloy Rods 2024 T3 One of the most widely used aluminum alloys, it finds applications in a variety of structural areas such as aircraft structures, fasteners, hardware, wheels, screw machine products. 2024 exhibits poor corrosion resistance for an aluminum alloy.

Additional Information:

• Packaging Details: READY STOCK

Aluminium Alloy Rods 7075 T6: Very high strength material used for highly stressed structural parts.

Applications: Aircraft fittings, gears and shafts, fuse parts, meter shafts and gears, missile parts, regulating valve parts, worm gears, keys, aircraft, aerospace and defense applications; bike frames, all terrain vehicle (ATV) sprockets.

Size 8 MM TO 100 MM AND ABOVE